Vacuum Chambers

This system required silicone to be dispensed into a medical device and then have a silicone seal placed over it without any air being trapped.

The chamber was loaded and unloaded by operators. Nest were placed into pass-through chambers that had sealing doors. The pass-through chambers were pulled down to the internal vacuum level before internal doors would open. This allowed the internal chamber to stay at vacuum level.

Inside the chamber silicone oil was dispensed and a silicone seal was installed over the oil.

The silicone oil was degassed in a chamber designed and built by Innovative.

Silicone Degassing skid. Silicone oil was degassed under extreme vacuum. Internal cascade design allowed high viscosity silicone oil to be 100% degassed

Dual Vacuum Chamber